Takaitaccen bayanin bene na filastik

1. Sunaye

Kalmomi na gama-gari na bene na filastik:

1) PVC: polyvinyl chloride

2) LVT: tayal vinyl na alatu

3) LVP: alatu vinyl plank

4) Wurin Vinyl

5) Ganyen Vinyl

6) WPC: itace filastik hadadden

7) SPC: dutse roba composite, Occident kasashen kira irin wannan bene RVP (m vinyl plank).

2. Rarrabewa

A halin yanzu, shimfidar bene na PVC ya zo cikin manyan nau'ikan biyu. Nau'in farko yana fasalta madaidaicin kayan samfuri daga ƙasa zuwa saman. Idan aka sami lalacewar ƙasa kamar konewa ko karce, ana iya dawo da ita cikin sauƙi ta hanyar gogewa da injin niƙa da shafa kakin zuma. Nau'i na biyu ya ƙunshi tsantsa mai haske na PVC a saman, tare da Layer na ƙasa wanda ya ƙunshi nau'in bugu da Layer na kumfa. A bayyane yake, nau'in farko yana ba da ƙarin fa'idodi dangane da karko da kiyayewa.

Dangane da tsari, za a iya rarraba bene na PVC a matsayin mai nadi ko a cikin takarda. Bugu da ƙari, LVT da WPC suna faɗuwa a ƙarƙashin nau'in bene mai tsauri, yayin da SPC (RVP) ke wakiltar nau'in bene mai wuya. Bugu da ƙari, za a iya ƙara shimfidar bene na PVC zuwa na yau da kullun (Dry Back), kulle (danna), da kuma wanda ba manne (Loose lay) dangane da hanyoyin haɗuwa.

Bambance-bambancen da zaɓuɓɓuka daban-daban a cikin masana'antar shimfidar katako na PVC suna ba da kewayon mafita don aikace-aikace daban-daban. Ko yana da sauƙi na kulawa, dorewa, ko takamaiman buƙatun taro, akwai zaɓuɓɓuka daban-daban da ke akwai don biyan buƙatu daban-daban. Kamar yadda fasaha ke ci gaba da ci gaba, ƙira da haɓakar shimfidar shimfidar PVC na iya ba da ƙarin zaɓuɓɓuka da dama a nan gaba.

3. Abun ciki

Filastik bene da aka yi da baya Layer, core Layer, gilashin fiber, ado takarda da lalacewa Layer daga kasa zuwa saman bi da bi.

4. Maɓalli mai mahimmanci

• Kwanciyar hankali: raguwa da haɓaka samfurin: 80 ℃, 6 hours. 0.25%, 0.15%

• Buckling dumama: 80 ℃ 6 hours EN

• Ƙarfin kullewa: Yanayin yanayi na al'ada (23 ℃): 5.0mm> 13-15kgs / 5cm, 4.2mm> 12kgs / 5cm; Short gefen amfani da kulle mai siffar V: 4.2mm>15-18kgs / 5cm.

• Ƙarfin kwasfa: Ƙarfin mannewa na fim ɗin launi da kayan tsakiya. • Haske:10+/-2.

5. PVC filastik bene dabara

Guduro PVC, Calcium carbonate, Stabilizer, ACR Processing Aid,Mai mai, CPE, Carbon baki.